TOAD 11.5 and SVN (cont)

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

TOAD 11.5 and SVN (cont)

nr_mendes
Thanks all for the feedback, see link bellow.
http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
<http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0>
I'm going to try tomorrow.
But what am i doing wrong?
Thanks,
Reply | Threaded
Open this post in threaded view
|

RE: TOAD 11.5 and SVN (cont)

Stephen Beausang
I am unable to tell what you are doing wrong from the information provided.

It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.

The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.

If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings.  Note: there are three different scenarios covered -  Local, WebDav and SVN Server. You will need to determine which one you are going to use.

I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you  can switch to a remote repository using WebDav or SVN Server.

Hope this helps

Stephen

From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
Sent: Wednesday, October 03, 2012 7:46 PM
To: [hidden email]
Subject: [toad] TOAD 11.5 and SVN (cont)


Thanks all for the feedback, see link bellow.

http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0

I'm going to try tomorrow.

But what am i doing wrong?

Thanks,

Reply | Threaded
Open this post in threaded view
|

Re: TOAD 11.5 and SVN (cont)

nr_mendes
Hello Stephen,

Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.

Know i'm going to try the server...

By the way were can i find Collabnet Client and Server – Certified???

I only see Client 64bits.

Thanks,

--- In [hidden email], Stephen Beausang <stephen.beausang@...> wrote:

>
> I am unable to tell what you are doing wrong from the information provided.
>
> It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
>
> The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
>
> If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings.  Note: there are three different scenarios covered -  Local, WebDav and SVN Server. You will need to determine which one you are going to use.
>
> I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you  can switch to a remote repository using WebDav or SVN Server.
>
> Hope this helps
>
> Stephen
>
> From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
> Sent: Wednesday, October 03, 2012 7:46 PM
> To: [hidden email]
> Subject: [toad] TOAD 11.5 and SVN (cont)
>
>
> Thanks all for the feedback, see link bellow.
>
> http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
>
> I'm going to try tomorrow.
>
> But what am i doing wrong?
>
> Thanks,
>


Reply | Threaded
Open this post in threaded view
|

RE: Re: TOAD 11.5 and SVN (cont)

Stephen Beausang
I'm happy  to have been able to help.

I'm not sure about the certified Collabnet Client. I searched the Collabnet website and it looks like they have a download. You would need to ask them about the certification status ..

We have had good success with Collabnet client, but you should be able to work with any SVN client. Toad just needs to know the path to SVN.exe

Stephen

From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
Sent: Thursday, October 04, 2012 12:15 PM
To: [hidden email]
Subject: [toad] Re: TOAD 11.5 and SVN (cont)



Hello Stephen,

Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.

Know i'm going to try the server...

By the way were can i find Collabnet Client and Server - Certified???

I only see Client 64bits.

Thanks,

--- In [hidden email]<mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@...<mailto:stephen.beausang@...>> wrote:

>
> I am unable to tell what you are doing wrong from the information provided.
>
> It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
>
> The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
>
> If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings. Note: there are three different scenarios covered - Local, WebDav and SVN Server. You will need to determine which one you are going to use.
>
> I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you can switch to a remote repository using WebDav or SVN Server.
>
> Hope this helps
>
> Stephen
>
> From: [hidden email]<mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> Sent: Wednesday, October 03, 2012 7:46 PM
> To: [hidden email]<mailto:toad%40yahoogroups.com>
> Subject: [toad] TOAD 11.5 and SVN (cont)
>
>
> Thanks all for the feedback, see link bellow.
>
> http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
>
> I'm going to try tomorrow.
>
> But what am i doing wrong?
>
> Thanks,
>

Reply | Threaded
Open this post in threaded view
|

Re: TOAD 11.5 and SVN (cont)

nr_mendes
Ok

So if i install a Collabnet client on the windows server, that will do the trick?

Thanks,

--- In [hidden email], Stephen Beausang <stephen.beausang@...> wrote:

>
> I'm happy  to have been able to help.
>
> I'm not sure about the certified Collabnet Client. I searched the Collabnet website and it looks like they have a download. You would need to ask them about the certification status ..
>
> We have had good success with Collabnet client, but you should be able to work with any SVN client. Toad just needs to know the path to SVN.exe
>
> Stephen
>
> From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
> Sent: Thursday, October 04, 2012 12:15 PM
> To: [hidden email]
> Subject: [toad] Re: TOAD 11.5 and SVN (cont)
>
>
>
> Hello Stephen,
>
> Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.
>
> Know i'm going to try the server...
>
> By the way were can i find Collabnet Client and Server - Certified???
>
> I only see Client 64bits.
>
> Thanks,
>
> --- In [hidden email]<mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@>> wrote:
> >
> > I am unable to tell what you are doing wrong from the information provided.
> >
> > It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
> >
> > The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
> >
> > If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings. Note: there are three different scenarios covered - Local, WebDav and SVN Server. You will need to determine which one you are going to use.
> >
> > I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you can switch to a remote repository using WebDav or SVN Server.
> >
> > Hope this helps
> >
> > Stephen
> >
> > From: [hidden email]<mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > Sent: Wednesday, October 03, 2012 7:46 PM
> > To: [hidden email]<mailto:toad%40yahoogroups.com>
> > Subject: [toad] TOAD 11.5 and SVN (cont)
> >
> >
> > Thanks all for the feedback, see link bellow.
> >
> > http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
> >
> > I'm going to try tomorrow.
> >
> > But what am i doing wrong?
> >
> > Thanks,
> >
>

Reply | Threaded
Open this post in threaded view
|

RE: Re: TOAD 11.5 and SVN (cont)

Stephen Beausang
I'm not sure if I understand what you mean.

If you are using Collabnet SVN, then Collabnet SVN client should be installed on the workstation where Toad is installed.  You will also need to configure the SVN repository on the Server.

Stephen

From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
Sent: Thursday, October 04, 2012 6:51 PM
To: [hidden email]
Subject: [toad] Re: TOAD 11.5 and SVN (cont)



Ok

So if i install a Collabnet client on the windows server, that will do the trick?

Thanks,

--- In [hidden email]<mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@...<mailto:stephen.beausang@...>> wrote:

>
> I'm happy to have been able to help.
>
> I'm not sure about the certified Collabnet Client. I searched the Collabnet website and it looks like they have a download. You would need to ask them about the certification status ..
>
> We have had good success with Collabnet client, but you should be able to work with any SVN client. Toad just needs to know the path to SVN.exe
>
> Stephen
>
> From: [hidden email]<mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> Sent: Thursday, October 04, 2012 12:15 PM
> To: [hidden email]<mailto:toad%40yahoogroups.com>
> Subject: [toad] Re: TOAD 11.5 and SVN (cont)
>
>
>
> Hello Stephen,
>
> Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.
>
> Know i'm going to try the server...
>
> By the way were can i find Collabnet Client and Server - Certified???
>
> I only see Client 64bits.
>
> Thanks,
>
> --- In [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@>>> wrote:
> >
> > I am unable to tell what you are doing wrong from the information provided.
> >
> > It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
> >
> > The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
> >
> > If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings. Note: there are three different scenarios covered - Local, WebDav and SVN Server. You will need to determine which one you are going to use.
> >
> > I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you can switch to a remote repository using WebDav or SVN Server.
> >
> > Hope this helps
> >
> > Stephen
> >
> > From: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > Sent: Wednesday, October 03, 2012 7:46 PM
> > To: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>
> > Subject: [toad] TOAD 11.5 and SVN (cont)
> >
> >
> > Thanks all for the feedback, see link bellow.
> >
> > http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
> >
> > I'm going to try tomorrow.
> >
> > But what am i doing wrong?
> >
> > Thanks,
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: TOAD 11.5 and SVN (cont)

nr_mendes
Hi Stephen,

Firts of all, many thanks for your reply.

This is very confusing let me explain to you what i did.

The proof of concept is working on my machine, both "server" and client install.

Now i want to configure a cliente/server enviroment but with diferent machines.

I followed the steps on your tutorial, chapter: "SVN server connection".

I've download this program "CollabNetSubversion-client-1.7.6-1-x64.exe " from  CollabNet and installed on my windows server 2003.

Next i've executed the following commands:

        cd d:\svn_repository
        svnadmin create Repository1

And then i changed the folloing files:

        svnserve.conf:  Uncomment the "password-db" entry so it points to the passwd file.
        passwd:  Add entries to the [users] section of the file, one for each user that will connect to the server.

After this i start up the svnserver with this command:

        svnserve -d -r D:\svn_repository
       
Then on my workstation i try to connect to the server with the following command:

D:\test\svn\Repository1>svn --username nr_mendes --password nr_mendes co svn://windows_server/svn_repository/Repository1 .

But it gives me an error:

svn: E210005: Unable to connect to a repository at URL 'svn://windows_server/svn_repository/Repository1'
svn: E210005: No repository found in 'svn://windows_server/svn_repository/Repository1'

And im stuck here...

Help..


--- In [hidden email], Stephen Beausang <stephen.beausang@...> wrote:

>
> I'm not sure if I understand what you mean.
>
> If you are using Collabnet SVN, then Collabnet SVN client should be installed on the workstation where Toad is installed.  You will also need to configure the SVN repository on the Server.
>
> Stephen
>
> From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
> Sent: Thursday, October 04, 2012 6:51 PM
> To: [hidden email]
> Subject: [toad] Re: TOAD 11.5 and SVN (cont)
>
>
>
> Ok
>
> So if i install a Collabnet client on the windows server, that will do the trick?
>
> Thanks,
>
> --- In [hidden email]<mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@>> wrote:
> >
> > I'm happy to have been able to help.
> >
> > I'm not sure about the certified Collabnet Client. I searched the Collabnet website and it looks like they have a download. You would need to ask them about the certification status ..
> >
> > We have had good success with Collabnet client, but you should be able to work with any SVN client. Toad just needs to know the path to SVN.exe
> >
> > Stephen
> >
> > From: [hidden email]<mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > Sent: Thursday, October 04, 2012 12:15 PM
> > To: [hidden email]<mailto:toad%40yahoogroups.com>
> > Subject: [toad] Re: TOAD 11.5 and SVN (cont)
> >
> >
> >
> > Hello Stephen,
> >
> > Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.
> >
> > Know i'm going to try the server...
> >
> > By the way were can i find Collabnet Client and Server - Certified???
> >
> > I only see Client 64bits.
> >
> > Thanks,
> >
> > --- In [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@>>> wrote:
> > >
> > > I am unable to tell what you are doing wrong from the information provided.
> > >
> > > It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
> > >
> > > The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
> > >
> > > If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings. Note: there are three different scenarios covered - Local, WebDav and SVN Server. You will need to determine which one you are going to use.
> > >
> > > I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you can switch to a remote repository using WebDav or SVN Server.
> > >
> > > Hope this helps
> > >
> > > Stephen
> > >
> > > From: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > > Sent: Wednesday, October 03, 2012 7:46 PM
> > > To: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>
> > > Subject: [toad] TOAD 11.5 and SVN (cont)
> > >
> > >
> > > Thanks all for the feedback, see link bellow.
> > >
> > > http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
> > >
> > > I'm going to try tomorrow.
> > >
> > > But what am i doing wrong?
> > >
> > > Thanks,
> > >
> >
>

Reply | Threaded
Open this post in threaded view
|

RE: Re: TOAD 11.5 and SVN (cont)

Stephen Beausang
Hello Nelson,
This is a  SVN configuration question, not a Toad question. This is a Toad Group, troubleshooting SVN configuration is  beyond the scope of this group.

Collabnet may be better able to assist you with the SVN questions.

Stephen


From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
Sent: Monday, October 08, 2012 7:32 AM
To: [hidden email]
Subject: [toad] Re: TOAD 11.5 and SVN (cont)



Hi Stephen,

Firts of all, many thanks for your reply.

This is very confusing let me explain to you what i did.

The proof of concept is working on my machine, both "server" and client install.

Now i want to configure a cliente/server enviroment but with diferent machines.

I followed the steps on your tutorial, chapter: "SVN server connection".

I've download this program "CollabNetSubversion-client-1.7.6-1-x64.exe " from CollabNet and installed on my windows server 2003.

Next i've executed the following commands:

cd d:\svn_repository
svnadmin create Repository1

And then i changed the folloing files:

svnserve.conf: Uncomment the "password-db" entry so it points to the passwd file.
passwd: Add entries to the [users] section of the file, one for each user that will connect to the server.

After this i start up the svnserver with this command:

svnserve -d -r D:\svn_repository

Then on my workstation i try to connect to the server with the following command:

D:\test\svn\Repository1>svn --username nr_mendes --password nr_mendes co svn://windows_server/svn_repository/Repository1 .

But it gives me an error:

svn: E210005: Unable to connect to a repository at URL 'svn://windows_server/svn_repository/Repository1'
svn: E210005: No repository found in 'svn://windows_server/svn_repository/Repository1'

And im stuck here...

Help..

--- In [hidden email]<mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@...<mailto:stephen.beausang@...>> wrote:

>
> I'm not sure if I understand what you mean.
>
> If you are using Collabnet SVN, then Collabnet SVN client should be installed on the workstation where Toad is installed. You will also need to configure the SVN repository on the Server.
>
> Stephen
>
> From: [hidden email]<mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> Sent: Thursday, October 04, 2012 6:51 PM
> To: [hidden email]<mailto:toad%40yahoogroups.com>
> Subject: [toad] Re: TOAD 11.5 and SVN (cont)
>
>
>
> Ok
>
> So if i install a Collabnet client on the windows server, that will do the trick?
>
> Thanks,
>
> --- In [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@>>> wrote:
> >
> > I'm happy to have been able to help.
> >
> > I'm not sure about the certified Collabnet Client. I searched the Collabnet website and it looks like they have a download. You would need to ask them about the certification status ..
> >
> > We have had good success with Collabnet client, but you should be able to work with any SVN client. Toad just needs to know the path to SVN.exe
> >
> > Stephen
> >
> > From: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > Sent: Thursday, October 04, 2012 12:15 PM
> > To: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>
> > Subject: [toad] Re: TOAD 11.5 and SVN (cont)
> >
> >
> >
> > Hello Stephen,
> >
> > Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.
> >
> > Know i'm going to try the server...
> >
> > By the way were can i find Collabnet Client and Server - Certified???
> >
> > I only see Client 64bits.
> >
> > Thanks,
> >
> > --- In [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@%3cmailto:stephen.beausang@%3cmailto:stephen.beausang@>>>> wrote:
> > >
> > > I am unable to tell what you are doing wrong from the information provided.
> > >
> > > It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
> > >
> > > The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
> > >
> > > If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings. Note: there are three different scenarios covered - Local, WebDav and SVN Server. You will need to determine which one you are going to use.
> > >
> > > I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you can switch to a remote repository using WebDav or SVN Server.
> > >
> > > Hope this helps
> > >
> > > Stephen
> > >
> > > From: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > > Sent: Wednesday, October 03, 2012 7:46 PM
> > > To: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>
> > > Subject: [toad] TOAD 11.5 and SVN (cont)
> > >
> > >
> > > Thanks all for the feedback, see link bellow.
> > >
> > > http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
> > >
> > > I'm going to try tomorrow.
> > >
> > > But what am i doing wrong?
> > >
> > > Thanks,
> > >
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: TOAD 11.5 and SVN (cont)

nr_mendes
Stephen,

Thank you very much for your help.

Finally it's working, but still there are some issues that i'm not sure how to apply.

Regards,

--- In [hidden email], Stephen Beausang <stephen.beausang@...> wrote:

>
> Hello Nelson,
> This is a  SVN configuration question, not a Toad question. This is a Toad Group, troubleshooting SVN configuration is  beyond the scope of this group.
>
> Collabnet may be better able to assist you with the SVN questions.
>
> Stephen
>
>
> From: [hidden email] [mailto:[hidden email]] On Behalf Of nr_mendes
> Sent: Monday, October 08, 2012 7:32 AM
> To: [hidden email]
> Subject: [toad] Re: TOAD 11.5 and SVN (cont)
>
>
>
> Hi Stephen,
>
> Firts of all, many thanks for your reply.
>
> This is very confusing let me explain to you what i did.
>
> The proof of concept is working on my machine, both "server" and client install.
>
> Now i want to configure a cliente/server enviroment but with diferent machines.
>
> I followed the steps on your tutorial, chapter: "SVN server connection".
>
> I've download this program "CollabNetSubversion-client-1.7.6-1-x64.exe " from CollabNet and installed on my windows server 2003.
>
> Next i've executed the following commands:
>
> cd d:\svn_repository
> svnadmin create Repository1
>
> And then i changed the folloing files:
>
> svnserve.conf: Uncomment the "password-db" entry so it points to the passwd file.
> passwd: Add entries to the [users] section of the file, one for each user that will connect to the server.
>
> After this i start up the svnserver with this command:
>
> svnserve -d -r D:\svn_repository
>
> Then on my workstation i try to connect to the server with the following command:
>
> D:\test\svn\Repository1>svn --username nr_mendes --password nr_mendes co svn://windows_server/svn_repository/Repository1 .
>
> But it gives me an error:
>
> svn: E210005: Unable to connect to a repository at URL 'svn://windows_server/svn_repository/Repository1'
> svn: E210005: No repository found in 'svn://windows_server/svn_repository/Repository1'
>
> And im stuck here...
>
> Help..
>
> --- In [hidden email]<mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@>> wrote:
> >
> > I'm not sure if I understand what you mean.
> >
> > If you are using Collabnet SVN, then Collabnet SVN client should be installed on the workstation where Toad is installed. You will also need to configure the SVN repository on the Server.
> >
> > Stephen
> >
> > From: [hidden email]<mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > Sent: Thursday, October 04, 2012 6:51 PM
> > To: [hidden email]<mailto:toad%40yahoogroups.com>
> > Subject: [toad] Re: TOAD 11.5 and SVN (cont)
> >
> >
> >
> > Ok
> >
> > So if i install a Collabnet client on the windows server, that will do the trick?
> >
> > Thanks,
> >
> > --- In [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@>>> wrote:
> > >
> > > I'm happy to have been able to help.
> > >
> > > I'm not sure about the certified Collabnet Client. I searched the Collabnet website and it looks like they have a download. You would need to ask them about the certification status ..
> > >
> > > We have had good success with Collabnet client, but you should be able to work with any SVN client. Toad just needs to know the path to SVN.exe
> > >
> > > Stephen
> > >
> > > From: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > > Sent: Thursday, October 04, 2012 12:15 PM
> > > To: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>
> > > Subject: [toad] Re: TOAD 11.5 and SVN (cont)
> > >
> > >
> > >
> > > Hello Stephen,
> > >
> > > Thank you very much for all the help finally i've managed to put to work the proof of concept, localy.
> > >
> > > Know i'm going to try the server...
> > >
> > > By the way were can i find Collabnet Client and Server - Certified???
> > >
> > > I only see Client 64bits.
> > >
> > > Thanks,
> > >
> > > --- In [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>, Stephen Beausang <stephen.beausang@<mailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@<mailto:stephen.beausang@%3cmailto:stephen.beausang@%3cmailto:stephen.beausang@%3cmailto:stephen.beausang@>>>> wrote:
> > > >
> > > > I am unable to tell what you are doing wrong from the information provided.
> > > >
> > > > It looks like the configuration information in Toad is preventing you from logging in to SVN. That is why there is no SVN project information available.
> > > >
> > > > The Team Coding configuration screen shows that you are using SVN to control all objects in the database, but you have not selected a SVN project.
> > > >
> > > > If you follow the steps in the SVN configuration documents I sent, you should be able to figure out what the problem. Most likely it is the server information your configuration settings. Note: there are three different scenarios covered - Local, WebDav and SVN Server. You will need to determine which one you are going to use.
> > > >
> > > > I have found that it is a good idea to set up a local repository for testing and proof of concept. This is the simplest configuration helps work out any glitches. Once you have everything working the way you want it in Team Coding, you can switch to a remote repository using WebDav or SVN Server.
> > > >
> > > > Hope this helps
> > > >
> > > > Stephen
> > > >
> > > > From: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com> [mailto:[hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>] On Behalf Of nr_mendes
> > > > Sent: Wednesday, October 03, 2012 7:46 PM
> > > > To: [hidden email]<mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com><mailto:toad%40yahoogroups.com>
> > > > Subject: [toad] TOAD 11.5 and SVN (cont)
> > > >
> > > >
> > > > Thanks all for the feedback, see link bellow.
> > > >
> > > > http://toadfororacle.com/thread.jspa?threadID=37750&tstart=0
> > > >
> > > > I'm going to try tomorrow.
> > > >
> > > > But what am i doing wrong?
> > > >
> > > > Thanks,
> > > >
> > >
> >
>